>120
MPa flexural strength
>2200
MPa modulus of elasticity
<20
µg/mm³ water absorption
6
veined gingival shades
Why our pink PMMA
A base that stays stable, wear after wear.
Highly cross-linked PMMA with no bubbles or impurities: a dense, homogeneous material that polishes to a high gloss and resists wear and staining.
Dense, no bubbles
A homogeneous, highly cross-linked material, free of bubbles and impurities, for clean milling and a high-gloss finish.
Stable, low absorption
Water absorption below 20 µg/mm³ and solubility below 0.8 µg/mm³, for a base that stays stable in the mouth.
Built to last
High wear resistance and good biocompatibility, for denture bases designed for long-term use.
Natural veined look
Fine veins run through every shade to mimic the vascularization of the gingiva, for a lifelike base without extra characterization.
Technical data (manufacturer data)
| Flexural strength | > 120 MPa |
|---|---|
| Modulus of elasticity | > 2200 MPa |
| Water absorption | < 20 µg/mm³ |
| Water solubility | < 0.8 µg/mm³ |
| Material | Veined, highly cross-linked PMMA |
Indications
Made for digital dentures.
Denture bases
Digital full dentures
Workflow
From design to finished denture.
01
Design
Design the base and the dental arch in your CAD software (3Shape, exocad or other).
02
Mill
Mill the base in the pink PMMA disc on a 5-axis milling machine, and the arch in a tooth-coloured PMMA disc.
03
Assemble
Bond the arch to the base with an MMA-based bonding material.
04
Finish
Polish to a high gloss. Characterize with a gingiva composite for even more natural aesthetics.
Shades
6 veined gingival shades.
From light to dark gingiva, to match each patient. Every shade is veined for a natural look.
Shade colours on screen are indicative only. Pink and Brown: shade guide available on request.
Gingival shades
6 veined shades
2S
2ST
3S
3ST
Pink
Brown
Specifications
The essentials.
Material
Veined, highly cross-linked PMMA
Flexural strength
> 120 MPa
Modulus of elasticity
> 2200 MPa
Water absorption
< 20 µg/mm³
Water solubility
< 0.8 µg/mm³
Disc diameter
Ø 98.5 · 95 mm
Thickness
20 – 40 mm
Shades
2S · 2ST · 3S · 3ST · Pink · Brown
Manufacturer
Shandong Huge Dental Material Corporation
Downloads
Documentation.
Instructions for use
PDF · coming soon
Certificates are available on request. Contact us
Mill your next denture with us.
Tell us your milling system, the diameter and the shades you need: our team gets back to you within 24 hours.
